Dr. Muhammad Agung Bramantya

Dr. Muhammad Agung Bramantya

pak bramDepartment of Mechanical and Industrial Engineering, Faculy of Engineering, Universitas Gadjah Mada
Jalan Grafika No. 2 Kampus UGM Yogyakarta 55281 INDONESIA
Phone/Fax : +62 274 521675
Mobile: +62 821 333 05 999
Email : bramantya@ugm.ac.id & bramantya99@gmail.com
Website: www.ugm.ac.id
Personal Web : www.bramantya.wordpress.com
Personal

Born on March 22, 1981
Indonesian
Muslim

Research Interest

Ph.D

Mechanical Engineering, Keio University, Japan, 2010
“Fundamental study on the inner structure of magnetorheological fluids by ultrasonic propagation method”

M.Eng
Engineering Design and Manufacturing, University of Malaya, Malaysia, 2007
“Development of a software for designing and manufacturing an impeller”

M.Eng
Mechanical Engineering, Universitas Gadjah Mada, Indonesia, 2005
“The effect of geometry and amount of obstacles toward onset flooding counter-current two phase flow,
air-water on vertical channel which porous inlet and sharp outlet”

B.Eng
Mechanical Engineering, Universitas Gadjah Mada, Indonesia, 2003
“Re-design conceptual aircraft Airbus A-330”

Professional Experience

Faculty Staff, Department of Mechanical and Industrial Engineering, Universitas Gadjah Mada, 2006 to present.
Visiting Assistant Professor, Department of Mechanical Engineering, Keio University, 2012.
Tutor, Engineering Design and Manufacturing, University Malaya, 2005 to 2007
Manager of System Development, KampongAkherat Multi-business, 2004 to 2005
Field Development Trainee, Unocal Indonesia Company, 2003

Awards

February’s Icon, Majalah Gatra, Indonesia, 2010.
Most 40 Indonesian Inspiring People (40 sosok terpilih), Media Indonesia, Indonesia, 2010.
Young Engineers Award, The Japan Society of Applied Electromagnetics and Mechanics, Japan, 2009.
Fujiwara Award, Keio University, Japan 2008.
The Best Poster Prize, The 11th International Conference on ERMR, Germany, 2008
The Fastest student finished the Master’s degree, Graduate School of Mechanical Eng., Gajah Mada University, 2005.
Cum Laude, Graduate School of Mechanical Engineering, Gadjah Mada University, 2005.
The Fastest finished his Bachelor’s degree, Department of Mechanical Engineering, Gajah Mada University, 2003.
The 1st Rank of Student, Department of Mechanical Engineering, Gadjah Mada University, 2003.

Research Experience
Investigation of Impact Force on Magnetorheological Fluids under Uniform Magnetic Field, SRA JICA AUN/SEED-Net, 2011-2013
Development of formula car for student racing (prototype 3), UGM, 2012-2013
Study of flow rate on water-air two phase flow using 1-2 MHz ultrasonic wave propagation method, S2 JTMI UGM, 2012
Performance study on loopwing wind-turbine with diffuser, S2 JTMI UGM, 2012
Preliminary Study of Appropriate Technology Index for Indonesia, Ristek, 2012
Research of Salt in Indonesia (multidiscipline), Institute for Research and Community Services UGM, 2011
Development of formula car for student racing (prototype 2), UGM, 2011-2012
Development of a Continuous Measurement of Gas-Water Two-Phase Flow System using Ultrasonic Method, DPP UGM, 2011
Analisa Unjuk Kerja Prototipe Turbin Angin Bersudu Loopwing dengan Aliran Udara Melintang, S2 JTMI UGM, 2011
Pembuatan dan Pengujian Model Turbin Angin Bersudu Loopwing, S2 JTMI UGM, 2011
Preliminary development of submarine prototype using magnetohydrodynamic drive, RA AUN/SEED-Net, 2010
Development of formula car for student racing (prototype 1), UGM, 2010-2011
Fundamental study on the inner structure of magnetorheological fluids by ultrasonic propagation method, JICA project for
AUN/SEED-Net, 2008-2010
Development of Software for Designing and Manufacturing of an Impeller, JICA project for AUN/SEED-Net, 2006-2007
Study on modification of lock-nut impeller of a centrifugal pump, UGM, 2006
The Effect of Geometry and Amount Obstacles toward Onset Flooding Counter-current Two Phase Flow Air-Water on Vertical
Channel Which Porous Inlet and Sharp Outlet, UGM, 2005
Power Distribution on Oil and Gas Factory, Unocal Indonesia Company, 2003
Redesign Conceptual Aircraft Airbus A 330, UGM, 2003
Machine supports for Oil and Gas Processing at Lawe-lawe Terminal, Unocal Indonesia Company, 2002

Teaching Experience
Post-graduate: Fluid mechanics, System modeling and FEA, Boundary layer and turbulence, Metrology thermal, Heat
transfer and two phase flow, Programming algorithm.
Under-graduate: Fluid mechanics, Two phase flow and heat transfer, Computational and system modeling, Internal
combustion engine, System modeling and FEA, Engineering mathematics, Probability and statistics, Programming
algorithm, Pump and compressor, Logistics and supply chain management, Project management, Engineering
economic analysis.
List of Publications
Journal Articles
M. A. Bramantya, I. P. Purwanto, A. Isnikurniawan and T. Sawada, Study of Magnetorheological Fluids under Impact Loading for
Low Magnetic Field, ASEAN Engineering Journal Part A, 2013. (paper submitted)
M. A. Bramantya, H. Takuma, J. Kuroiwa and T. Sawada, Ultrasonic investigation of the effect of volume fraction on the clustering
structures of magneto-rheological fluids, Materials Science Forum, Vol. 670, pp 198-206, 2011
M. A. Bramantya and T. Sawada, The influence of magnetic field swept rate on the ultrasonic propagation velocity of
magnetorheological fluids, Journal of Magnetism and Magnetic Materials, 2010, doi:10.1016/j.jmmm.2010.11.040
M. A. Bramantya, M. Motozawa and T. Sawada, Ultrasonic propagation velocity in magnetic and magnetorheological fluids due to an external magnetic field, Journal of Physics: Condensed Matter, Vol. 22, No. 32, 5 pp., 2010.
M. A. Bramantya, H. Takuma and T. Sawada, Hysteresis phenomena of ultrasonic velocity change in magnetorheological fluids,
International Journal of Applied Electromagnetics and Mechanics, Vol. 33, Nos. 3-4, pp. 1365-1375, 2010.
M. A. Bramantya, H. Takuma and T. Sawada, Ultrasonic study on the clustering structures of magnetorheological fluids under a
uniform magnetic field, Journal of the Japan Society of Applied Electromagnetic and Mechanics, Vol. 17, No. 2, pp. 279-284, 2009.
M. A. Bramantya, H. Takuma, M. Faiz and T. Sawada, Ultrasonic propagation velocity in magneto rheological fluid under a uniform magnetic fields by ultrasound, Journal of the Japan Society of Applied Electromagnetic and Mechanics, Vol. 17, No. 3, 433-436, 2009.
M. A. Bramantya, M. Motozawa, H. Takuma, M. Faiz and T. Sawada, Experiment analysis of clustering structures in magnetic and MR fluids by ultrasound, Journal of Physics: Conference Series, 149, 012040, 2009.
M. A. Bramantya, Sugiyono and Rama Doni, Pengaruh Diffuser pada Flens Isap dan Lock Nut Impeller Berbentuk Tirus terhadap
Kurva Karakteristik Pompa Sentrifugal, Jurnal Mesin (Journal of Mechanical Engineering), Universitas Udayana, Indonesia, 2008 (in Indonesian language).
Bramantya, M. A., Zahari Taha and Yasuo Suga, A Java GUI for the Design of an Impeller, Jurnal Mesin (Journal of Mechanical
Engineering), Universitas Udayana, Indonesia, Vol. 2, No. 1, june 2007.
Bramantya, M. A. and Sugiyono, Pressure Characteristic on a Capture Pneumatic Chamber due to Nose Position for Oscillating
Water Column, Jurnal Mesin dan Industri (Journal of Mechanical and Industrial Engineering), Gadjah Mada University, Indonesia, Vol. 4, No. 2, pp. 155 – 160, May 2007. ISSN: 1693 – 704X.
Bramantya, M. A. and Sugiyono, Aerodynamics Performance for Body Development of a Solar Car, Jurnal Mesin dan Industri
(Journal of Mechanical and Industrial Engineering), Gadjah Mada University, Indonesia, Vol. 4, No. 2, pp. 161 – 165, May 2007.
ISSN: 1693 – 704X.
Bramantya, M. A. and Sawada, T., Properties and Applications of Ferro-fluid: Magnetically Controlled Suspension, Indonesian
International Journal of Social, Science, and Technology, University of Malaya, Vol. 2, No. 1, Malaysia, 2007. ISSN: 1823-948X
Bramantya, M. A., Fauzun, and Ruhaizin, S., Preliminary Development of Aerodynamics for a Solar Car, Jurnal Mesin dan Industri (Journal of Mechanical and Industrial Engineering), Gadjah Mada University, Indonesia, Vol. 4, No. 1, pp. 83 – 88,January 2007.ISSN: 1693 – 704X.
Bramantya, M. A., Estimating Performance of Centrifugal Pumps Using JAVA Programming, Journal of International Postgraduate Students – University of Malaya, Vol. 2, No. 2, July 2006, pp. 18 – 29, ISSN: 1823-948X.
Bramantya, M. A. and Indarto, The Effect of Amount Obstacles on Counter-current Two Phase Flow Air-Water in Vertical Channel, Journal of International Postgraduate Students – University of Malaya, Vol. 1, No. 1, August 2005, pp. 24 – 32, ISSN: 1823-948X (in Indonesian language)

 

Proceedings
Hermawan, M. A. Bramantya and L. A. Nugroho, Studi Eksperimental Pengaruh Penambahan Diffuser terhadap Unjuk Kerja Turbin Angin Bersudu Loopwing dengan Variasi Rasio Luas Diffuser, Proceeding of Seminar on Mechanical Engineering, S2 JTMI, Yogyakarta, Indonesia 31 January 2013 (in Indonesian language)

M. A. Bramantya, Hermawan and M. Hamarung, Pengaruh Perubahan Debit Aliran Udara-Air terhadap Respon Amplitudo dengan Menggunakan Gelombang Ultrasonik pada Aliran Stratified Horizontal, Proceeding of Seminar on Mechanical Engineering, S2 JTMI, Yogyakarta, Indonesia 31 January 2013 (in Indonesian language)

I. P. Purwanto, A. Isnikurniawan, T. Sawada and M. A. Bramantya, Experimental Study of Magnetorheological Fluids under Impact Loading for Low Magnetic Field, Proceeding of the Magnetic Fluid Japan Conference, Kyoto, Japan, pp. 18 – 20, 2012

Mukhlis, Bramantya and Hermawan, Pengaruh Perubahan Debit Aliran Udara-Air terhadap Respon Amplitudo dengan Menggunakan Gelombang Ultrasonik pada Aliran Stratified Horizontal, Proceeding of the 7th National Seminar on Industrial and
Informatics Tech. Engineering, Yogyakarta, Indonesia, pp. 308 – 313, 2012 (in Indonesian language)

S. Maulana, Khasani and M. A. Bramantya, Pengaruh Perubahan Temperatur terhadap Respon Amplitudo Pola Aliran Slug dengan Menggunakan Gelombang Ultrasonik pada Pipa Horizontal, Proceeding of the 7th National Seminar on Industrial and Informatics Tech. Engineering, Yogyakarta, Indonesia, pp.413 – 418, 2012 (in Indonesian language)

I. P. Purwanto, D. Prasetyo, M. K. Billah and M. A. Bramantya, Karakteristik Fluida Magnetorheological MR-122 EG saat Terkena Beban Impact, Proceeding of the 11th Annual Seminar of Mechanical Engineering of Indonesia, Yogyakarta, Indonesia, 2012 (in Indonesian language)

M. A. Bramantya, Khasani and E. N. Syarif, Pengembangan Pengukuran Kontinyu Aliran Dua Fasa Cair dan Gas Menggunakan
Metode Gelombang Ultrasonik, Proceedings of the Annual Engineering Seminar 2012, Yogyakarta, Indonesia 16 February 2012 (in Indonesian language)
A. B. Wibowo, A. T. Wiyanto and M. A. Bramantya, Pengaruh medan magnet dan dimensi water channel terhadap gaya dorong
pada kapal dengan system magnetohidrodinamika, Proceedings of the Annual Engineering Seminar 2011, pp. C-139-C143,
Yogyakarta, Indonesia, 16 February 2011, ISBN 978-602-98726-0-6 (in Indonesian language).
F. A. Aryanto, D. H. Vegasha and M. A. Bramantya, Pengaruh medan listrik dan kondisi fluida terhadap system penggerak
magnetohidrodinamika, Proceedings of the Annual Engineering Seminar 2011, pp. C-144-C-148, Yogyakarta, Indonesia, 16
February 2011, ISBN 978-602-98726-0-6 (in Indonesian language).
M. A. Bramantya, Khasani and D. Firdausi, Analisa Frekuensi dalam Pengukuran Kecepatan Aliran Dua Fasa pada Saluran Tertutup Menggunakan Gelombang Ultrasonik, Proceeding of 10th Annual National Conference on Mechanical Engineering, ISME (Indonesian Society of Mechanical Engineering), pp. 249 – 252, Malang, Indonesia, 2 – 3 November 2011. ISBN:
978-602-19028-0-6 (in Indonesian language).
M. A. Bramantya, H. Takuma, J. Kuroiwa and T. Sawada, A Study on the inner structure of magnetorheological fluids by image
processing, The Asia-Pasific Symposium on Applied Electromagnetics and Mechanics, Kuala Lumpur, Malaysia, 28-30 July 2010.
M. A. Bramantya and T. Sawada, The influence of magnetic field swept rate on the ultrasonic propagation velocity of
magnetorheological fluids, The 12th International Conference on Magnetic Fluids, Sendai, Japan, 1-5 August 2010.
M. A. Bramantya, H. Takuma, J. Kuroiwa and T. Sawada, Study of ultrasonic wave propagation on magnetorheological fluid with
different frequency, The 5th Pacific Rim Conference on Rheology (PRCR-5), Hokkaido, Japan, 1-6 August 2010.
T. Sawada and M. A. Bramantya, Ultrasonic wave propagation in MR fluids, the Annual Meeting of JSME (Japan Society of
Mechanical Engineering), Nagoya, September 2010.
M. A. Bramantya, H. Takuma, J. Kuroiwa and T. Sawada, A study on the inner structure of magnetorheological fluids by image
processing, Proceedings of the 22nd Symposium on Electromagnetics and Dynamics, Moji, Japan, 19-21 May 2010.
M. A. Bramantya and T. Sawada, Ultrasonic Study on Magnetic and Magneto-rheological Fluid under a Uniform Magnetic Field,
Proceeding of the 2nd Regional Conference in Manufacturing Engineering, Bandung, Indonesia, 2009.
M. A. Bramantya, H. Takuma and T. Sawada, Hysteresis Phenomena of Ultrasonic Velocity Change in Magnetorheological Fluids, Proceeding of the 14th International Symposium on Applied Electromagnetics and Mechanics, Xi’an, China, 2009
M. A. Bramantya, H. Takuma and T. Sawada, The effect of volume fraction on the clustering structures of magnetorheological fluids by ultrasonic investigation, Proceeding of the 6th Japanese-Mediterranean Workshop on Applied Electromagnetic Engineering for Magnetic, Superconducting and Nano Materials, pp. 47-48, Bucharest, Romania, 2009.
M. A. Bramantya, H. Takuma, J. Kuroiwa and T. Sawada, Magnetic field swept rate on the ultrasonic propagation velocity of
magnetorheological fluids, Proceeding of the Japan Symposium on Magnetic Fluids, pp. 48-50, Keio University, Yokohama, Japan,2009.

M. A. Bramantya, H. Takuma and T. Sawada, Study on the Effect of the Volume Fraction in Magnetorheological fluids, Proceeding
of the Mechanical Engineering Congress, Vol. 2, pp. 103-104, Morioka, Japan, 2009.
M. A. Bramantya, H. Takuma and T. Sawada, Hysteresis change of ultrasonic wave velocity in magnetorheological fluid, Proceeding of the 21st. Symposium on Electromagnetic and Dynamics, 4pp, Nagano, Japan, 2009
M. A. Bramantya, H. Takuma and T. Sawada, Hysteresis change of ultrasonic wave velocity in MR fluid caused by the magnetic field, Proceeding of The Annual Seminar of JSME Kanto Branch, pp. 391-392, Ibaraki, Japan, 2009.
M. A. Bramantya, H. Takuma, M. Faiz and T. Sawada, Ultrasonic velocity anisotropy of MR fluids, Proceeding of The Japan
Symposium on Magnetic Fluids, Doshisha University, Japan, 2008.
M. A. Bramantya, H. Takuma and T. Sawada, Ultrasonic velocity anisotropy of magneto-rheological suspension, Proceeding of First Regional Conference in Manufacturing Engineering, Manila, Philippine, 2008.
M. A. Bramantya, H. Takuma and T. Sawada, Ultrasonic study on the clustering structures of magnetorheological fluids under a
uniform magnetic field, Proceeding of MAGDA 17 Conference, pp.299-304, Hitachi, Japan, 2008.
H. Takuma, M. A. Bramantya, M. Faiz and T. Sawada, Time-Dependent Ultrasonic Propagation Properties of a MR Fluid under
Magnetic Fields, Proceeding of The Annual Seminar of The Japan Society of Fluid Mechanics (CD ROM), Kobe, Japan, 2008.
M. A. Bramantya, M. Motozawa, H. Takuma, M. Faiz and T. Sawada, Experiment analysis of clustering structures in magnetic and MR fluids by ultrasound, Book of Abstract of The 11th International Conference on Electrorheological Fluids and Magnetorheological Suspensions, pp.51, Dresden, Germany, 25 – 29 August 2008.
M. A. Bramantya, H. Takuma, M. Faiz and T. Sawada, Ultrasonic Propagation Velocity in Magneto Rheological Fluid under a
Uniform Magnetic Field, Proceeding of Asia-Pasific Symposium on Applied Electromagnetics and Mechanics (CD ROM), pp.360-363, Bangkok, Thailand, 24 – 25 July 2008.
Bramantya, M. A. and Sugiyono, Improving Characteristic of Centrifugal Pumps due to Helical Inducer Shape of Lock Nut Impeller,
Proceeding of 11th AUN/SEED-Net Fieldwise Seminar for Manufacturing Engineering, pp. 107-111, Kuala Lumpur, Malaysia, 3 – 4 December 2007.
Bramantya, M. A., Sugiyono and Rivani, P., Karakteristik Pompa Sentrifugal dengan Modifikasi Diffuser dan Lock Nut Impeller
Berbentuk Helical Inducer, Proceeding of 6th Annual National Conference on Mechanical Engineering, ISME (Indonesian Society of Mechanical Engineering), pp. 299 – 307, Banda Aceh, Indonesia, 20 – 22 November 2007. ISBN: 979-97726-8-0 (in Indonesian language).
Bramantya, M. A., Zahari Taha and Yasuo Suga, A Java GUI for Impeller Design and Manufacture, 3rd International Conference on Humanoid, Nanotechnology, Information Technology, Communication and Control, Environment, and Management, Manila,
Philippines, March 2007. ISSN: 1656-7226.
Bramantya, M. A., Zahari Taha, and Yasuo Suga, Software Development for Manufacturing of an Impeller, Proceeding of 9th
AUN/SEED-Net Fieldwise Seminar on Manufacturing Systems, pp. 107-111, Kuala Lumpur, 2007.
Minh, H. L., Zahari T., Herliansyah, M. K. and Bramantya, M. A., PC-Based Milling Machine Toward 2.5 D Prototyping Purpose,
Proceeding of International Seminar on Product Design and Development, Yogyakarta, Indonesia, December 13-14, 2006 pp VII-1 – VII-7, ISBN: 979-15577-0-5.
Bramantya, M. A., Zahari Taha and Yasuo Suga, Development of a 2D Software for Impeller Design and Manufacture, Proceeding
of International Seminar on Product Design and Development, Yogyakarta, Indonesia, December 13-14, 2006 pp VII-7 – VII-12,
ISBN: 979-15577-0-5.
Bramantya, M. A., Zahari Taha, Yasuo Suga, and Norhafizan Ahmad, Development of a Software for Designing and Manufacturing of an Impeller, International Conference & AUN/SEED-Net Fieldwise Seminar on Manufacturing and Material Processing, Kuala Lumpur, 2006, ISBN: 983-42876-0-7
Bramantya, M. A. and Indarto, The Study of Amount Obstacles Toward Onset Flooding Counter-current Two Phase Flow Air-Water on Vertical Channel, Master’s Thesis publication, Gadjah Mada University, 2005 (in Indonesian language).
Bramantya, M. A. and Indarto, Study of Obstacle Geometry on the Onset Flooding Counter-current Vertical Water-gas Flows,
Proceeding of National Conference on Industrial Research and Technology Development, pp. MF 17 – MF 22, Yogyakarta, 2005,
ISBN: 979-99266-1-0 (in Indonesian language).
Bramantya, M. A., Power Distribution on Oil and Gas Factory, Field Development Training Publication, Unocal Indonesia Company, 2003.
Bramantya, M. A., Machine supports for Oil and Gas Processing at Lawe-lawe Terminal, On the Job Training Publication, Unocal
Indonesia Company, 2002 (in Indonesian language).

Other
Member of accreditation team for Bachelor program in Mechanical Engineering, UGM (BAN PT S1), 2012.
Manager of Research Industry Development, Institute for Research and Community Services, UGM, 2011-2012
Reviewer for Paper of International Seminar on Product Design and Development, UGM, 2011
Reviewer for Paper of National Seminar on Thermo-fluids, Department of Mechanical and Industrial Eng., UGM, 2011.
Faculty advisory of Student Water Rocket Competition of Indonesia, UGM, 2011.
Faculty advisory of “Bimasakti” student’s formula car for the Student Formula SAE Competition of Japan, UGM, 2011,
2012, and 2013.
Leader of accreditation team for Master’s program in Mechanical Engineering, UGM (BAN PT S2), 2011.
Member of accreditation team for Doctoral program in Mechanical Engineering, UGM (BAN PT S3), 2011.
Secretary of National Seminar on Thermo-fluids, Department of Mechanical and Industrial Engineering, UGM, 2011.
Member of Pusat Kajian dan Pengembangan Kebijakan Industrialisasi, UGM, 2011-2013
Organizing committee of 4th Regional Conference on Manufacturing, AUN Seed Net, 2011.
Leader of alumni meeting for Department of Mechanical and Industrial Engineering, UGM, 2011.
Instructor of compressor field on Rotating Equipment training for PT Badak, LKFT UGM, 2011.
Instructor of basic reservoir modeling on 2nd Geothermal Course UGM-UoA-GNS, 2011.
Editor for Journal of the Japan Society of Applied Electromagnetic and Mechanics, 2009.
Organizing committee of the Japan Symposium on Magnetic Fluids, 2009.

Social Activities
Penasehat, Yayasan Barkasmal, Yogyakarta, 2013 – sekarang.
Direktur, Pondok Mahasiswa Al-Madinah Nusantara, Yogyakarta, 2012 – sekarang.
Komisaris, Al-Madinah Islamic Tour and Travel, Yogyakarta, 2013 – sekarang.
Pengawas, Yayasan Al-Madinah Nusantara, Yogyakarta, 2012 – sekarang.
Penasehat, DPD Wahdah Islamiyah, Yogyakarta, 2011 – 2013.
Anggota Koordinator Wilayah Jawa dan Sumatra, DPP Wahdah Islamiyah, Makasar, 2012 – sekarang.
Penasehat, Ma’had Aly Al-Madinah, Yogyakarta, 2012 – sekarang.
Koordinator, Keluarga Alumni Teladan Yogyakarta (KATY) angkatan 1999, Yogyakarta, 2011 – sekarang.
Pengurus, Keluarga Alumni Teladan Yogyakarta (KATY) Pusat, Yogyakarta, 2013 – sekarang.
Penasehat, TPA Masjid Al-Hidayah Purwosari, Yogyakarta, 2012 – sekarang.
Takmir, Masjid Al-Ikhlas Samirono, Yogyakarta, 2010 – sekarang.
Panitia, Pembangunan Masjid Manhajul Hidayah Samirono, Yogyakarta, 2010 – sekarang.
Koordinator Tim Perintis, SDIT Wahdah Islamiyah, Yogyakarta, 2013 – sekarang.
Tim Pendiri, SDIT Yaa Bunayya, Yogyakarta, 2011.

Share this post

Leave a Reply

Your email address will not be published. Required fields are marked *